Romwood

Rectangular Hollow Sections are priced per metre.

Code	Measurements
1RHSA	125mm x 75mm x 3mm
1RHSB	100mm x 50mm x 3mm
1RHSC	100mm x 100mm x 3mm
1RHSCD	150mm x 50mm x 3mm
1RHSD	150mm x 100mm x 4mm
1RHSE	200mm x 100mm x 4mm
JOINERS	Suits above sizes
BENDS	45 and 90 Degrees to suit above sizes

NOTE: All RHS can be made in any length up to 6m.
1RHSA, 1RHSC & 1RHSCD are SUPERGAL HOT DIP GALVANISED to AS/NZS 4792.
1RHSD and 1RHSE is HOT DIP GALVANISED to AS/NZS 4680.

Rectangular Hollow Sections can be cut to size as needed, but will be charged at the full per-metre rate (e.g. 3.6m ordered would be charged as 4m).
Joiners & Bends are available for purchase with RHS only. (ie. Cannot be purchased on their own.)

All bends are made to order in 45^o and 90^o only.

RHS - various sizes	Joiner - various sizes
RHS - 90º Bend	RHS - 45º Bend